TAGGR® Rough Surface Marker
Tube marker for marking very rough, smooth, oily, dirty, wet, dusty and rusty surfaces. Permanent and highly covering.
Colors
White
Yellow
Orange
Red
Pink
Blue
Green
Grey
Black
Container
- 50 ml Tube
- Marking head with 2.5 mm steel ball
Note: Enquiries for this product are currently only possible by email or telephone. We ask for your understanding.
Downloads
Reason for use
Ideal for very rough, oily and wet surfaces
Application
Permanent and highly covering
Schreibkopf
2.5 mm steel ball
Heat resistance
-80°C - 160°C
Other important product details
- For marking all surfaces
- Indestructible marking head
- Weather-resistant in accordance with DIN EN ISO 2810
- Insulating
- Good media resistance
Reason for use
- Oil / grease
- Wetness
- Rust
- Glass
- Stone
- Wood
- Plastic
- Neoprene
- Under water
Labelling
No problem at all
Our TAGGR® Rough Surface Marker is suitable for labelling and marking all surfaces.
Technical data
| Viscosity | 15.000 - 20.000 mPas |
| VOC value* | 540 g/L ±20 g/L |
| Application temperature | -20° C - 35° C |
| Temperature stability | -80° C - 160° C |
| pH value | - |
| Flashpoint | 29° C |
| Dust-dry after** | approx. 5 min |
| Fully hardened after** | approx. 24 hours |
| Density | ca. 1,05 g/cm3 |
| Shelf life | 6 - 48 months |
Media resistances
| Water | |
| Gasoline | |
| Super 95 | |
| White spirit 135/175 | |
| Special boiling point product 100/140 | |
| Ethanol | |
| Isopropyl alcohol (IPA) | |
| n-Butanol | |
| 2‑Methoxy-1-Propanol | |
| Butylacetate | |
| Ethylacetate | |
| Acetone | |
| Methyl ethyl ketone (MEK) | |
| Titanium grease | |
| WD-40 | |
| Hydrochloric acid 0,5 mol/l | |
| Hydrofluorether | |
| Skydrol LD4 | |
| Skydrol 5 | |
| Diesel | |
| AdBlue | |
| Novamet 100 |
- Resistant: no or very little impairment
- Bedingt beständig: schwacher bis mäßiger Angrif
- Unstable: strong attack / paint dissolves in medium
